Table of Contents
Advertisement
Table 2: Rear Panel VP-27 Presentation Switcher Features
#
Feature
18
Video
Y/C IN 4-pin
Connectors
19
CV IN RCA
20
Y/C OUT 4-pin
21
CV OUT RCA
22
PC IN 15-pin HD Connectors
23
PC OUT 15-pin HD Connector
24
DIP-switches
25
RS-232 (Tx, Rx, G) Terminal
Block Connector
26
PC AUDIO IN 3.5mm Mini Plugs
27
PC AUDIO OUT 3.5mm Mini
Plug
28
MIC 6.3mm Phone Jack Connector Connect to the microphone
29
CV AUDIO IN RCA Connectors
30
CV AUDIO OUT RCA
Connectors (L and R)
31
Y/C AUDIO IN RCA Connectors
32
Y/C AUDIO RCA Connectors (L
and R)
33
MASTER OUT RCA Connectors
(L and R)
34
Power Connector with Fuse
35
POWER Switch
1 Always set to OFF (for factory use)
2 From 1 to 4
6
Your VP-27 Presentation Switcher
Function
Connect to the s-Video sources
Connect to the composite video sources
Connect to the s-Video acceptor
Connect to the composite video acceptor
Connect to the VGA/UXGA video sources
Connect to the VGA/UXGA video acceptor
DIP-switches for setup of the unit (DIP 1 and 4 are not used; DIP
1
2 PROG
, DIP 3 MIC DC; see section 6.2)
Connects to the PC or the Remote Controller
Connect to the s-Video unbalanced audio sources
Connect to the PC unbalanced stereo audio acceptor (for the PC
video)
Connect to the unbalanced audio sources
video
Connect to the composite video unbalanced audio acceptor (for
the composite video)
Connect to the s-Video unbalanced audio sources
Connects to the s-Video unbalanced audio acceptor (for the
s-Video)
Connect the master unbalanced audio channel acceptor
AC connector enabling power supply to the unit
Illuminated switch for turning the unit ON or OFF
2
2
2
2
of the composite
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2
2
Advertisement
Table of Contents
