Show / Add Places Along The Route - Navman M-Nav 750 User Manual

M-Nav 750 | User Manual
8.3

Show / Add Places Along the Route

Note: This section assumes that the M-Nav 750 is showing your current route on the map.
When the M-Nav 750 has calculated a route, you can search
for useful places along the route, such as hotels or banks.
To search for places along the route, touch Route.
The 'Trip' menu is displayed.
Touch Places along the trip.
The 'Select place category' screen is displayed.
Use the down-arrow and up-arrow to scroll to the correct
category, if necessary.
Touch the category (e.g. Parking).
The M-Nav 750 immediately searches for places in that
category then displays a list of results with their distances
from the route.
The total number of results is shown at the bottom of the
screen.
Use the up-arrow and down-arrow to see the complete
listing, if necessary.
Touch a place if you want to shown it on the map.
Choose an option from the menu if you want to add the place
to your route (e.g. touch Add a via point.)
Repeat this procedure if you want to show or add another
place along the route.
37