Add A Location As A Via Point - Navman M-Nav 750 User Manual

M-Nav 750 | User Manual
The location is set as the destination and marked with a
chequered fl ag, and the route is calculated immediately and
shown on the map.
8.2

Add a Location as a Via Point

Note: This section assumes that the M-Nav 750 is showing your current route on the map.
When the M-Nav 750 has calculated a route, you can add
one or more locations as via points to visit along the route or
to detour to.
To add a location as a via point, touch Menu to display the
'Navigation main menu'.
Touch Find location.
Find and display the location of the fi rst via point (see
Sections 7.1 to 7.4 if necessary) that you need to visit.
Note: The blue line shows the existing route.
Touch Add a via point.
The location is immediately added as a via point and the
route is amended to include this new location.
Repeat this procedure to add another via point.
If you need to show or re-order the via points, see Section
8.4.
36