Read A Stored Message - Navman M-Nav 750 User Manual

M-Nav 750 | User Manual
This example shows a Route-to message. Route-to
messages have two extra option buttons:
• Go to exit from the Message option and navigate to the
new location (see Section 5.8).
• Show to exit from the Message option and display the
new location on the map (see Section 5.8).
Note: If you want to reply to the message, do this fi rst,
before you touch Go or Show.
5.3

Read a Stored Message

A stored message can be a new message that you have not yet read, or an old message that you
have not deleted.
To read a stored message at any time, press the Hot Button
on the top of the M-Nav 750 to display the 'Main Menu'.
The number of unread stored messages is shown in the top
left corner of the screen. In this example there are 3 unread
messages.
Touch Messages.
The 'Received Messages' screen lists all your stored
messages. The most recent message is at top of the list, with
the time that it was received by your M-Nav 750.
Touch the up-arrow or down-arrow to move up or down the
message list, if necessary.
Touch the stored message that you want to read. It is
displayed immediately, along with any previous replies. If you
cannot see all of the messages, move the scroll bar on the far
right hand side of the screen.
New and Unread.
Read.
Read and Replied.
Note: The M-Nav 750 will display a maximum of 30 replies to any stored message.
18