Table of Contents
Advertisement
snom MeetingPoint Ÿ User Manual
C
aLL CompLetion
See also "Call Completion" on page 28. The factory default setting is "off".
Changing the setting to turn it on:
On the phone
Press
> 2 Call Features > 2 Outgoing Calls > 3 Call Completion > Press
or
to show "On" on display > Press
return to the idle screen.
On the web interface
Open the phone's web interface > Advanced > Behavior > Phone Behavior >
Call completion >
r
ingtones
You can choose one of 10 built-in ringtones or a custom melody, or turn off the
ringer.
•
A ringtone can be assigned to an identity so that incoming calls for
different identities will be announced by different ringtones. See
"Configuring New Identity/Account" on page 39.
•
A ringtone can also be assigned to contact types so that incoming calls
from phone numbers of that type will be announced by the selected
ringtone. See "Contact Types" on page 23.
•
When using a headset, choose whether the ringtone will sound in the
headset or on the loudspeaker: Preferences > Ringtone Defaults > Save.
Note: The ringer set for a contact type overrides the ringer for a particular
identity; in case of a conflict the phone will the contact type ringer. If your
ringtones don't seem to work as expected, contact your administrator. There
may be an overriding setting on the PBX.
© 2009 snom technology AG
man_snomMeetingPoint_v101_en
.
Customizing Phone Settings
to save setting > Press
to
45
Advertisement
Table of Contents
