Reject Anonymous Calls - Snom MeetingPoint User Manual

snom MeetingPoint Ÿ User Manual
Press
r
edireCt
Press
The incoming call will start to ring on the other phone.
Automatically
These are your options when you want to have incoming calls rejected or
forwarded automatically:
• Deny List. See "Contact Types" on page 23.
• DND (do not disturb mode). All incoming calls will be forwarded to the
number set in call forwarding or receive a busy signal if there is no setting
for call forwarding.
Press
• Call Forwarding. See page 44.

Reject anonymous calls

Please note that calls from analog phone connections without caller ID
will, most likely, be received as anonymous calls and rejected if you turn
this function on.
> 2 Call Features > 3 Incoming Calls > 2 Reject anonymous > Press
or to show "On" on display > Press
C f
aLL orWarding
Forward All: Forwarding all incoming calls to the number of the phone,
extension, or mailbox specified as this function's target.
Forward when Busy: Calls ringing while phone is busy are forwarded to the
number of the phone, extension, or mailbox specified as this function's target.
Forward after Timeout: When a call starts ringing, the phone will wait for
© 2009 snom technology AG
man_snomMeetingPoint_v101_en
The caller hears the busy signal and the number
will be placed on the Deny list so that incoming
calls from that number will always be rejected. This
function is available only if set beforehand on the
phone's web interface, Advanced > Behavior >.
Phone Behavior > Deny All Feature: "on"
(
bLind transfer
> Dial the number you wish to transfer the call to > Press
to activate, press
)
again to turn DND off.
> Press
Using the Phone
>
.
36