Table of Contents
Advertisement
6
Printer Setup
Installing the platen knob
The platen knob is packed into a recess in the packaging material.
Install the knob on the shaft located inside the large hole on the left side of
the printer. Make sure that the two splines of the platen shaft inside the
printer fit into the slots inside the knob's spindle. Press the knob carefully
but firmly into place as far as it will go.
Installing the ribbon cassette
Make sure the printer is unplugged from its power outlet.
Caution!
Never move the print head while the printer is turned on. Doing so can damage
the printer. If you have just finished printing, let the print head cool for a few
minutes before you touch it.
Remove the front cover of the printer.
Remove the ribbon cassette from its package.
Advertisement
Table of Contents
Troubleshooting
