Star LC-1511 User Manual page 21

Swing the rear cover back and down until it stops.
Note:
You can also completely remove the rear cover by simply pulling it away from
the back of the printer after you open it.
Caution!
The metal edge of the cover is rather sharp. Take care to avoid injuring your
hands when handling it.
Pass the fanfold paper through the space between the printer case and the
rear cover.
Unlock the two tractor covers by pulling their gray levers up, and slide
them so they are aligned approximately with the holes on the sides of the
paper. Also move the center paper support so that it is approximately
halfway between the two tractors.
Open the covers of both tractors and insert the paper so the tractor pins fit.
Loading fanfold paper
Metal edge
13