Star LC-1511 User Manual page 86

78 Troubleshooting
Problem
Printer behaves erratically.
Printing suddenly stops.
Automatic Sheet Feeder
does not feed paper.
Possible Cause
The interface cable is
connected incorrectly or
damaged.
Static electricity caused by
interference from nearby
electrical devices or by low-
level humidity is affecting
printer operation.
The EDS Mode setting for
the Automatic Sheet Feeder
is wrong.
Recommended Action
Check to make sure that the
printer interface cable is
connected correctly. If it is,
try a different cable.
Make sure that the printer is
not too close to any devices
with electric motors or try to
raise the humidity level.
Enter the EDS Mode and
turn off Switch 4 in Bank A
(see page 31).