Installing The Paper Guide - Star LC-1511 User Manual

Installing the paper guide

9
Open the front cover of the printer.
By hand, move the cartridge holder to the left side where there is a cutout in
the top guide to allow easy installation and removal of the ribbon cassette.
Using your thumb and forefinger to squeeze the two tabs on the ribbon
cassette towards the center, carefully remove the cassette from the holder.
Use the procedure under "Installing the ribbon cassette" on page 6 to install
a new cassette.
Installing the paper guide
Insert the two tabs on the rear cover of the printer into the holes in the
bottom of the paper guide.
To remove the paper guide from the printer, simply pull the tabs out of the
holes.