Lever For Adjustment Of Cutting Height; Seat; Fuelling - Husqvarna Rider 15V2 Operator's Manual

Lever for adjustment of cutting height

With this lever the cutting height can be adjusted to
9 different positions.
Combi unit

Seat

The seat has a jointed attachment on the front
edge and can be tipped forward.
The seat can also be adjusted lengthways.
Move the lever, mounted under the frontedge of the
seat, to the left. The seat can then be moved
forwards or backwards to the required position.

Fuelling

The engine should be run on 87 octane (or higher)
unleaded petrol/gasoline (no oil added). For more
information about methanol and ethanol fuels, see
"Technical Data".
Do not fill the tank completely, leave an expansion
area of at least 2.5 cm (1").
WARNING!
Petrol/gasoline is highly
inflammable. Observe care and
fill up with fuel outdoors (see
safety instructions).
IMPORTANT INFORMATION
The air intake grille in the engine cover
behind the driver's seat must not be
blocked by, for example, clothing, leaves,
grass or dirt.
Impaired cooling of the engine. Risk of
major engine damage.
14
– English
PRESENTATION
40-90 mm
(1 9/16" - 3 9/16")