Introduction Transmit up to 230ft (70m) of uninterrupted 1080p signal with the Atlona HDBaseT-Lite transmitter. With pass through support of 4Kx2K, 1920x1200, as well as Lossy & Lossless audio signals over a single CAT cable, the HDTX provides an affordable, high quality, solution for your audio/video needs.
(check your outlet or the power cable). Back Panel 1. Power Port: Connect included captive screw connector and power adapter here. 2. CAT5e/6/7 OUT Port: Connect CAT5e/6/7 cable from here to a compatible receiver. Ex. AT-HDRX (recommended) Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
To ensure the power cable isn’t too long, a captive screw connector has been included. The pin out (see picture 3) and the wire configuration (see picture 4 and 5) are shown below. Black: - White: + Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
It may also cause damage to your AT-HDTX. Opening the product will void the warranty. Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or contact Atlona directly.
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’ decision, either return of the price paid for the product, repair, or replacement of the product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Customer’s receipt.
Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.
Need help?
Do you have a question about the AT-HDTX and is the answer not in the manual?
Questions and answers