NetComm NB604 User Manual page 22

In the case of an IP over Ethernet connection, the following options are available:
PARAMETER
Obtain an IP Address automatically
Use the following Static IP Address
WAN IP Address
WAN Subnet Mask
WAN gateway IP Address
Primary DNS Server
Secondary DNS Server
Request IPv6 Address
Request Prefix Delegation
Click Next once the connection configuration details have been entered.
(a) Select to enable NAT, Fullcone NAT or the builtin Firewall function for the connection
(b) Select to enable IGMP Multicast mode for the connection and click Next
(c) Select the Default Gateway Interface to use for the connection and click Next
(d) Select the DNS Server Interface to use for the connection and click Next
(e) Review the configured functions of the connection and click Save/Apply to save the new WAN Service
connection.
In the case of a bridged connection, click Save/Apply to save the new WAN Service connection.
YML604X
www.netcommwireless.com
Select to use DHCP for the connection. The DHCP options can then be set.
Option 55 – Set the DHCP Parameter request List
Option 58 – Set the length of time between DHCP lease renewals
Option 59 – Set the length of time between DHCP rebinding
Option 60 – Set the DHCP VCI
Option 61 (IAID) – Set the DHCP Identity Association ID
Option 61 (DUID) – Set the DHCP Unique Identifier
Option 125 – Set to enable or disable DHCP Vendor-Identifying Vendor Options
Select to use a Static IP Address for the connection
Enter the Static IP Address to use for the connection
Enter the subnet mask to use for the connection
Enter the gateway IP address to use for the connection
Enter the Primary DNS server to use for the connection
Enter the secondary DNS server to use for the connection
Select to request an IPv6 on the connection
Select to request IPv6 Prefix Delegation for the connection
DEFINITION
NetComm NB604 – ADSL2+ Modem Router
22