SWEEX IEEE 802.11g Wireless Router User Manual page 19

Static IP Address
If you are required to use a permanent IP address to connect to the Internet, then select Static IP Address.
a. Enter the IP address assigned by your ISP. This is the Router's IP address, when seen from the Internet.
Your ISP will provide you with the IP address you need to specify here.
b. Enter Subnet Mask. This is the Router's subnet mask, as seen by external users on the Internet. Your
ISP will provide you with the subnet mask.
c. Enter ISP Router Address. Your ISP will provide you with the IP address you need to specify here.
This is the ISP server's IP address.
Dynamic IP Address
If your ISP supports DHCP or you are connecting through a dynamic IP address, then select Dynamic IP
Address.
a. Enter the Host Name if your ISP requires it, or leave it blank.
b. Enter the MAC Address and click Clone MAC Address button if your ISP requires a specific MAC
address, or keep it default setting.
Important: Some ISPs may require a specific MAC address in order to establish Internet connection.
Click APPLY button when completing the selected WAN Setting.
802.11g Wireless Router User's Manual
18