Table of Contents
Advertisement
2.4
Connecting to CQR-981 by using Web Browser
After the network connection is built, the next step what you should do is setup the router with proper
network parameters, so it can work properly in your network environment.
Before you connect to the wireless router and start configuration procedures, your computer must be
able to get an IP address from the wireless router automatically (use dynamic IP address). If it‟s set to
use static IP address, or you‟re unsure, please follow the below instructions to configure your computer
with dynamic IP address:
If the operating system of your computer is....
Windows 95/98/ME
Windows 2000
Windows XP
Windows Vista/7
2.4.1
Windows 95/98/ME
1. Click „Start‟ button (it should be located at lower-left corner of your computer), then click control
panel. Double-click Network icon, and Network window will appear. Select „TCP/IP‟, then click
„Properties‟.
- please go to section 2.4.1
- please go to section 2.4.2
- please go to section 2.4.3
- please go to section 2.4.4
12
Hide quick links:
Advertisement
Table of Contents
