CNET CQR-981 User Manual page 43

Wireless-n pico 3.5g broadband router
Hide thumbs Also See for CQR-981:
Table of Contents

Advertisement

Item
Service
Connection Speed
SIM PIN
Retype SIM PIN
APN
Username
Password
PHONE Number
DNS
Clone MAC Address
Always
Dial on demand
Manual
Enable IGMP Proxy
Enable Ping Access on WAN
Description
Select correspond mobile connection service type.
Select preferred mobile Internet connection speed.
Enter the PIN code of your SIM card here.
Confirm your PIN code.
Enter the Access Point Number provided by your ISP.
Default is internet.
Username/Password required for establishing the
Internet connection.
Enter the dialing number here, default setting is *99#.
If ISP provides you DNS information, please select
Attain DNS automatically, otherwise select Set DNS
Manually and input the DNS information into the
blank.
Copy the MAC address from the device you had
registered to your ISP if your ISP asks for the specific
MAC Address.
Select Always for the 3.5G connection to be always
established.
Select Dial on demand to establish 3.5G connection
only when there is an outgoing traffic.
Select Manual to manually connect or disconnect the
3.5G connection.
The Internet Group Management Protocol (IGMP) is
a communications protocol used to manage the
membership of Internet Protocol multicast groups.
IGMP is used by IP hosts and adjacent multicast
routers to establish multicast group memberships. You
can choose to enable IGMP Proxy to provide service.
Select Enable Ping Access on WAN, will make WAN
IP address response to any ping request from Internet
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents