Table of Contents
Advertisement
•
Using two 3/4 in. wrenches, disconnect the burner supply
tube.
Figure 12.7 Disconnect Burner Supply Tube
•
Remove the two screws securing the valve to the valve
bracket.
Ground
Wire
Figure 12.8 Remove Valve from Valve Bracket
•
Disconnect the pilot and orifi ce tubes using a 7/16 in. and
a 5/8 in. wrench.
•
Reverse these steps to replace the gas valve. Make sure
the ground wire is reattached as shown in Figure 12.8.
Heat & Glo LifeStyle Collection • Dakota 42-B/Dakota 42H-B • 4036-909 Rev C • 07/06
B. Battery Replacement
•
Remove switch cover plate from the wall.
Figure 12.9 Switch Cover Plate
•
Replace two D-cell battieres.
Figure 12.10 Batteries
•
Replace switch cover plate.
25
Advertisement
Table of Contents
