Appliance Setup; Clean The Appliance; Grate Assembly Placement; Positioning The Logs - Heat & Glo LifeStyle Dakota 42-B Owner's Manual

Vented gas appliance
Table of Contents

Advertisement

9 9

Appliance Setup

A. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated in-
side the fi rebox or underneath in the control cavity.
WARNING
Shock Risk
Fire Risk
Use ONLY optional accessories approved
for this appliance.
Using non-listed accessories voids
warranty.
Using non-listed accessories may result
in a safety hazard.
Only Hearth & Home Technologies
approved accessories may be used
safely.
B. Grate Assembly Placement
Ensure grate assembly is over burner assembly, centered
from left to right, and back legs are in grate brackets (see
Figure 9.1)
Back Legs in Grate Brackets
Figure 9.1
Back Legs in Grate Brackets
16
Heat & Glo LifeStyle Collection • Dakota 42-B/Dakota 42H-B • 4036-909 Rev C • 07/06
C. Positioning the Logs
See Section 13.B. for log descriptions and illustrations.
Place right rear log on the grate against the appliance right
side wall.
Figure 9.2
Right Rear Log (SRV720)
Place the left rear log on the grate against the left wall and
rest it on log.
Figure 9.3
Left Rear Log (SRV728)
Place the fork of log onto the left front bar and rest its back
on right rear log.
Figure 9.4
Left Side Log (SRV723)
Place front log in front of the main grate with its left end
resting on left rear log as shown.
Figure 9.5
Front Log (SRV727)

Advertisement

Table of Contents
loading

Table of Contents