Controllers; Dmx Controller - Iluminarc Ilumipod Inground Tri-3 IP Optic 25 RGB User Manual

If you have not
configured the
DMX starting
address and DMX
mode for each product,
they will all use their
default values. This
means that all products
will operate in unison.
Ilumipod Inground Tri-3 IP Optic 25 RGB User Manual Rev. 5

Controllers

The Ilumipod Inground Tri-3 IP Optic 25 RGB can operate with a standard DMX controller or
the Ilumicode addresser. The sections below will show you how to connect these products to
the corresponding controllers. The instructions to operate these products with each of the above
controllers are in the Operation

DMX Controller

The Ilumipod Inground Tri-3 IP Optic 25 RGB products can work with a standard
DMX controller. The channel assignments will depend on the chosen personality (see
the Menu Map) and the DMX address assigned to each product (see Programming).
The figure below illustrates how to connect the DMX controller to the Ilumipod
Inground Tri-3 IP Optic 25 RGB products.
chapter of this User Manual.
Installation
9