Ilumicode - Iluminarc Ilumipod Inground Tri-3 IP Optic 25 RGB User Manual

Installation
ILUMINARC®
suggests that you
connect no more
than 20 products
together at one time with
this controller and keep the
total distance to less than
60 m (197 ft). Otherwise,
you might need to use an
optically isolated signal
amplifier.
10
Ilumicode Addresser
The Ilumicode addresser ("Ilumicode") is required to program the settings on the
Ilumipod Inground Tri-3 IP Optic 25 RGB. The diagram below shows how to connect
the Ilumicode addresser to this product.
Note that this connection will control multiple products at the same time, all having the
same DMX address.
The Ilumicode must be used to configure the product. The Ilumicode can be
purchased separately through your ILUMINARC® sales representative.
Ilumipod Inground Tri-3 IP Optic 25 RGB User Manual Rev. 5