Table of Contents
Advertisement
4. Operation
When you scroll
through the
menu options,
you will see
many of them that do not
correspond with this menu
map. Skip them, as they
do not work with the
RGB-only output
products.
Ilumipod Inground Tri-3 IP Optic 25 RGB User Manual Rev. 5
Ilumicode Addresser
The Ilumipod Inground Tri-3 IP Optic 25 RGB needs an external controller, the Ilumicode
addresser, to change its configuration.
Ilumicode Panel Description
Button
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the
<ENTER>
currently selected value into the selected function
Navigates upwards through the menu list and increases
<UP>
the numeric value when in a function
Navigates downwards through the menu list and
<DOWN>
decreases the numeric value when in a function
Turns the unit on. The unit will turn off automatically
<POWER>
after 30 seconds of inactivity.
Control Options
You can set the Ilumipod Inground Tri-3 IP Optic 25 RGB start address in the 001–512 DMX
range. This allows for the control of up to 73 fixtures in the 7-channel ARC FULL personality.
Programming
Carry out all the programming procedures indicated below from the control panel. Refer to the
Menu Map
to learn how the menu options relate to each other.
Use <ENTER> and <MENU> to change levels in the Menu Map. This is equivalent to moving
right and left, respectively. Use <UP> and <DOWN> to move vertically within the Menu Map
options.
DMX Personality
1.
Go to PERSON and select any DMX personality.
Ilumipod Inground Tri-3 IP Optic 25 RGB
2.
Make sure to rearrange the DMX addresses of all fixtures in the current DMX
universe to avoid address overlapping.
DMX Starting Address
1.
Go to DMX.
2.
Select a starting DMX address (001–512).
Function
ARC 1
ARC 1 + D
ARC FULL
SOLID
Operation
11
Advertisement
Table of Contents
