Controllers; Dmx Controller - Iluminarc Inground Tri-3 IP Optic 25 WW User Manual

If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Ilumipod Inground Tri-3 IP Optic 25 WW User Manual Rev. 3

Controllers

The Ilumipod Inground Tri-3 IP Optic 25 WW can operate with a standard DMX controller or
the ILUMICODE addresser. The sections below provide information on how to connect these
products to the corresponding controllers. The instructions to operate these products with each
of the above controllers are in the

DMX Controller

The Ilumipod Inground Tri-3 IP Optic 25 WW can work with a standard DMX controller. The
channel assignments will depend on the chosen personality (see the corresponding
section) and the DMX address assigned to each product (see the
The figure below illustrates how to connect the DMX controller to the Ilumipod Inground Tri-3
IP Optic 25 WW.
Operation chapter of this manual.
Installation
Menu Map
Programming section).
9