Technical Information; General Maintenance - Chauvet Intimidator Wash LED 150 User Manual

5. T
ECHNICAL

General Maintenance

Intimidator™ Wash LED 150 User Manual (Rev. 02)
I
NFORMATION
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and/or mechanical wear. To maintain
optimum performance and minimize wear, you should clean your lighting fixtures at
least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean this fixture, follow the instructions below:

Unplug the fixture from power.

Wait until the fixture is cold.

Use a vacuum (or dry compressed air) and a soft brush to remove dust collected
on the external surface/vents.

Clean all external optics with a mild soap solution, ammonia-free glass cleaner, or
isopropyl alcohol.

Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.

Softly drag any dirt or grime to the outside of the external optics.

Gently polish the external optics until they are free of haze and lint.
Always dry the external optics carefully after cleaning them.
Do not spin the cooling fans using compressed air because you could damage
them.
Page 15 of 20