Table of Contents
Advertisement
1
Automation labels and projector commands can now be executed from an interface on the
Control Panel. Press
as shown in Figure 17.
2
A new window opens as seen in Figure 18. Select an automation label to view the actions
associated with the label. Press
3
When a projector is configured for automation, projector primitives and macros can be triggered
from this interface as well. Select the projector primitive or macro to be executed, and click the
Send Projector Primitive
Please refer to the GDC Installation Manual for instructions on how to configure automation
labels, actions and devices.
4. Content Manager
4.1. About the Content Manager
4.1.1. Introduction
The SX-2000/SX-2001 Content Manager allows the user to manage the contents of the server to:
1
Download content from a disk or source on the network.
2
Download keys [KDM‟s] required for playing back content from disk or source on the network.
3
Delete content that exists on the server.
4
Check that the content that is already on the server is fine and the files are complete and
proper.
4.1.2. Accessing the Content Manager
2
Automation
on the
Control Panel
Execute
to execute the automation label.
or
Send Projector Macro
Figure 19
SX-2000/SX2001 Front Panel.
to start the manual automation interface
to send the command to the projector.
4. CONTENT MANAGER
1
Hide quick links:
Advertisement
Table of Contents
