GDC SX-2001A SERIES User Manual page 13

6 [Loop]
7 [3D Sync]
8 [Clear]
9 [Edit Cue]
10
[ ]
11 [ ]
12 [Shows]
13 [Load Show To Play]
14 [Save Show]
15 [New Show]
[Delete Show]
16
17 [Copy Show]
When [Loop] is selected, the contents in the
in a loop when [►] is pressed.
Synchronizes clips for 3D showing.
Removes all clips on the playlist.
Go to Edit Cue>TimeCode Keypad (refer to
(refer to 20 in Figure 5).This will bring up the cue editing user interface
used to add, remove or edit existing automation cues in the playlists.
Moves the highlighted clip in the
Makes sure an item is selected from the
When [ ] is pressed, the selected item will move to before the previous
clip.
Moves the highlighted clip in the
Makes sure an item is selected from the
When [ ] is pressed, the selected item will move to after the next clip.
This displays a list of all the playlists saved on the server. Selecting a
playlist here displays the contents of the playlist for editing. A playlist that
is currently playing may not be edited.
NOTE: Selecting a playlist here does not load it for playback. The
Show to Play" button has to be pressed to load the playlist into the player
for playback.
Loads the selected playlist into the player for
Saves the playlist currently being edited.
Creates a new blank show playlist. A name must be specified for the
playlist.
Make sure an item is selected in the
[Delete Show] is pressed, the system will delete the selected playlist and
remove it from the Shows drop-down menu.
The delete action is irreversible. The system will prompt you to confirm the
delete action before it proceeds to delete the playlist.
Duplicates currently selected playlist. When
entry keypad will appear for you to enter the new name of the duplicate
playlist.
Playlist will run continuously
19 in Figure 5) > Goto End
Playlist ahead in the chronological order.
Playlist before pressing
Playlist down in the chronological order.
Playlist before pressing
playback.
Shows drop-down menu. When
[Copy Show] is pressed, a text
2. SMS
[ ].
[ ].
"Load