GDC SX-2001A SERIES User Manual page 33

1 Select the source of data you want to ingest content from and click Open.
Please refer to GDC Installation Manual to configure the source of data.
2
Browse the source and select the directory where the package is located. The list of packages
in the directory will be displayed in the top right section of the screen.
3 Click View CPL to display the list of CPLs available in the packages. You can use this button to
toggle between the package list and CPL list displayed in the top right section of the screen.
4 Click under the Transfer
check indicates a selected package or CPL. You can select multiple packages or CPLs.
5 Information about the selected package or CPL, including the file size, is shown in the section
below the package or CPL list.
6 Press Import to queue downloading of the package or CPL. (To bypass ingestion for direct
playback you can press
7 When done selecting the package(s), click the
IMPORTANT: Always press
can monitor the progress of ingest by pressing the
Monitor Ingest Progress
8 Live Play can be used instead of
back from a CRU or network source. This is not supported through USB or DVD but can be
used for direct playback through a CRU or network source (provided the network source has
sufficient bandwidth to stream the content).
IMPORTANT: You should always use
9 When you press the Live Source
through the Live Play
You should always detach live play sources whenever you are done using them via
column to select the package or CPL you wish to download. A green
Live Play instead. Refer to
Close
Close after you are done starting the download of content. You
for more information about Status.
Import in order to bypass content ingestion and play directly
Import whenever possible.
button you can view all clips currently mounted and available
feature. You can detach Live Play
Live Play below for more info.)
button.
Status button. Please refer to
sources through this interface as well.
4. CONTENT MANAGER
Section 4.2.6.
Live Play.