Copyright Notice - GDC SX-2001A SERIES User Manual

Thank you for purchasing a GDC Digital Cinema Server SX-2000A Series with
Integrated Media Block/SX-2001A Series from GDC Technology Limited.
To ensure proper operation and to maximize the server's value, please review this User Manual. It will guide
you through all the features and benefits of the new SX-2000A with Integrated Media Block/SX-2001A.

COPYRIGHT NOTICE

Copyright © 2011 by GDC Technology Limited
All rights reserved. No part of this manual may be copied or distributed, transmitted, transcribed, stored in a retrieval
system, or translated into any human or computer language, in a form or by any means, electronic, mechanical, photocopying,
recording, magnetic, optical, manual or otherwise, or disclosed to third parties without prior written permission of
GDC Technology Limited.
TRADEMARKS AND SERVICE MARKS
DSR (Digital Super Realism)
Other product names mentioned herein are used for identification purposes only and may be trademarks of their
respective companies.
MANUAL DISCLAIMER
This manual is made with SMS version 7.7b and there might be slight differences depending on the software version the
server is running. The contents, features and specifications stated in this manual are subject to change without notice due to
continuous product development and improvements. In no other event shall GDC Technology Limited be liable for any loss of
profit or any other commercial damages, including but not limited to special, consequential, or other damages.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
is a registered trademark of GDC Technology Limited .