Navibe Mercury 100 User Manual page 31

degrees (° ) and as a direction on the compass icon
11. TMP: Temperature. Shows the current temperature in ℃ or ℉,
temperature is the electronic detection, because of the chip
characteristic, under the temperature difference environment, needs
15~20 minute change current temperatures.
12.
：Used to display current azimuth, AZM, SLP or TMP.
13.
：Switch between KM (Kilometer) or MI (Mile) for displaying the distance in
14.
Bike, Waypoint or Route mode.
15. "Eight Direction" Compass: When showing the azimuth, each direction
has a range of ±22.5° . For example, the Northeast (45° ) direction includes all
bearings between 22.5° ~67.5° .
16. MAX: Maximum speed. Shows the maximum riding speed on record as mi/h or
km/h.
17. AVG: Average speed. Shows the average riding speed on record as mi/h or km/h.
18.
19. Calorie Unit: The Calorie display shows Kcals. If less than Kcal, it switches to
cal.
20. Speed Unit: The unit speed is to be measured in. Switch instantaneously
between
21. Backlight indicator.
22. Recorder storage indicator: Divides the total number of entries into 6 parts.
Increments by 1 block for each sixth of total storage.
23. Bike Mode: Switching to this mode will show information about current ride.
24. WayPoint indicator: Press the Select button to cycle between
4 Digit Display.
3 Digit Display.
.
30
.
This