Navibe SP611 User Manual

Sport gps receiver

Advertisement

Quick Links

SP611
Sport GPS Receiver User manual

Advertisement

Table of Contents
loading

Summary of Contents for Navibe SP611

  • Page 1 SP611 Sport GPS Receiver User manual...
  • Page 2: Table Of Contents

    Introduction Table of Contents Announcement Warnings Caution Welcome to Navibe General Information vi-vii Reference Hardware Description Button Description Table 02-04 LCD Screen Words & Icons Definition Operation Flow Getting Started Bracket Mounting Instruction 08-10 Pin Assignment USB GPS Receiver...
  • Page 3 Introduction Compass Systems Corp. Email: service@cpss.com.tw No part of this User’s Manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying recording ,for any purpose other than the purchaser’s personal use, without the written permission of Compass Systems Corp. Information in this User’s Manual is subject to change without notice.
  • Page 4: Warnings

    Some certain knowledge is required to be well known by the user for proper and safe use of Navibe Sport GPS receiver. Please read this User’s Manual and safe use of Navibe Sport GPS receiver. Please read this User’s Manual first before operation.
  • Page 5: Caution

    The Navibe Sport GPS receiver must continuously find at least to earth. The Navibe Sport GPS receiver must continuously find at least three of these satellites to calculate your position and your movement.
  • Page 6 Take it now --- it can be your best friend! Application Conditions: Navibe Sport GPS receiver is not designed for indoors or under water usage. It uses Global Positioning System (GPS) satellites to calculate distances, current/maximum/average speed. Navibe Sport GPS receiver is intended for outdoors sport application usage in the temperature range of -10°C~ 60°C.
  • Page 7: General Information

    Introduction General Information 1. Package list Thank you for purchasing the SP611. Please make sure the SP611 Navibe Sport GPS Receiver package contain the following items: Navibe Sport GPS receiver Armband User manual Three brackets If any of the items are missing, please contact the local dealer or retailer.
  • Page 8 Introduction 3. Sprinkling water resistance The Navibe Sport GPS Receiver is sprinkling water resistant. 4. Changing the battery Please always shut down the Navibe Sport GPS receiver before changing the battery. The instruction of changing the battery is shown below:...
  • Page 9: Hardware Description

    Reference Hardware Description Button 2 Button 1 LCD Backlight Power Button 3 Mode/Reset LCD Screen...
  • Page 10: Button Description Table

    Reference Button Description Table The Sport GPS has three Buttons. The first is power Button that is named Button1. The second is LCD Backlight on/off Button that is named Button 2. The third is Mode/Reset Button that is named Button 3. The function table of Button is shown as follows: Button 1 Action...
  • Page 11 Reference Button2 Action Description LCD Backlight ON Press < 1 second, then LCD back light stays on for 5 seconds. Press till the light is ON, then LCD back light stays on permanently. LCD Backlight OFF Press button again > 2 seconds, then LCD back light OFF.
  • Page 12 Reference Button2 & Button3 Action Description Press Button2 and Button3 Press 2nd and 3rd Buttons together for together minimum 3 seconds., then it changes between MILE MPH to KM KM/H, default setting is KM KM/H.
  • Page 13: Lcd Screen Words & Icons Definition

    Reference LCD Screen Words & Icon Definition GPS – to indicate GPS status MAX – For MAX speed AVG – For average speed MPH – Mile per hour KM/H – Kilometer per hour KM – Kilometer for distance MILE – Mile for distance Battery Icon –...
  • Page 14: Operation Flow

    Reference Operation Flow (Once power is ON, MAX speed will be shown) Press button1 Power ON MAX Speed Press button 3 Reset MAX, AVG > 2 seconds speed & Distance Press button3 < 1 second AVG Speed Press button3 < 1 second...
  • Page 15: Getting Started

    2. Press the Button 1 to turn on the power and start the operation. First start may take up to 60 seconds to acquire all the satellite data. 3. Once GPS is 3D locked, the LCD screen of Navibe Sport GPS receiver will display the distance (KM), current speed (KM/H) and maximum speed (KM/H).
  • Page 16: Bracket Mounting Instruction

    Mount the bracket on the Navibe Sport GPS receiver (Figure 1). Insert armband to the hole and slide through the bracket (Figure 2). Then fix the Navibe Sport GPS receiver on the upper arm to create an enclosure (Figure 3).
  • Page 17 Reference 2. Fix It On The Waist Belt Mount the bracket on the Navibe Sport GPS receiver (Figure 4). Then use the bracket to fix the Navibe Sport GPS receiver on the waist belt (Figure 5). Figure 4 Figure 5...
  • Page 18 Reference 3. Assemble it on the bike Assemble the Navibe Sport GPS receiver on the bike (see below). Then you are ready to have a biking adventure.
  • Page 19: Pin Assignment

    Reference Pin Assignment Mini-USB female connector Signal Name +5 VDC TX (RS-232) – GPS output (NMEA) TX (TTL) – GPS output (NMEA) Ground...
  • Page 20: Usb Gps Receiver

    Reference USB GPS Receiver After plugged in the USB cable into Navibe Sport GPS receiver, Navibe Sport GPS receiver can be used as a normal USB GPS receiver.
  • Page 21 Compass Systems Corp. Email: service@cpss.com.tw ©Copy right 2005 by Compass Systems Corp. All rights reserved. April 2005 Printed in Taiwan...

Table of Contents