Wlan Module - HP EliteBook Revolve 810 G1 Maintenance And Service Manual

WLAN module

Description
Intel Centrino Advanced-N 6235 Combo Adapter
Intel Centrino Advanced-N 6205 Combo Adapter
CAUTION:
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove the
module to restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal.
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the computer. (The
WLAN module tilts up.)
38 Chapter 4 Removal and replacement procedures
To prevent an unresponsive system, replace the wireless module only with a wireless
Battery on page
Service cover on page
The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal.
33).
34).
Spare part number
670292-001
695915-001