8.
Remove the hinge cap (4).
Reverse this procedure to install the hinge cover and hinge cap.
Display assembly
Description
Hinge cover (includes hinge cap, WWAN antenna cables and transceivers,
and WWAN antenna shield)
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Service cover (see
b.
WWAN module (see
c.
WLAN module (see
d.
Solid-state drive (see
e.
Keyboard (see
f.
Bottom cover (see
Battery on page
33), and then remove the following components:
Service cover on page
WWAN module on page
WLAN module on page
Solid-state drive on page
Keyboard on page
44)
Bottom cover on page
34)
36)
38)
40)
48)
Component replacement procedures
Spare part number
716743-001
61