Install The Bidet - Kohler Escale 19046W Installation And User Manual

Install the Bidet

1. Install the services.
2. Make sure that the hot and cold water supply pipes and the waste are
installed correctly.
Note! The hot and cold water supplies must be installed with isolating
valves.
3. Fit the taps to the bidet in accordance with the manufacturer's
instructions.
4. Refer to dimensions and mark the centre holes on the wall for the
attachment bolts.
Caution! Make sure that you avoid hidden cables and pipes when drilling
holes in the wall.
5. Drill the fixing holes using an 8mm dia drill.
6. Insert the wall plugs into the drilled holes and fit the attachment bolts.
7. Screw the metal pins, supplied in the component pack, on to the
attachment bolts.
8. Insert the plastic fittings, supplied in the component pack, into the bidet
ensuring that they are fully pushed in and the grub screws line up with
the holes in the side of the bidet.
Wall
Plug
6
Attachment Bolt
P3955100
1040458-K01-A