Detach The Tv Stand For Wall Mount; Position The Tv Set; Secure The Tv Set - Hitachi LE42EC05AU User Manual

Detach the TV Stand for Wall Mount

Before mounting the TV on the wall, the TV stand must be removed.
Carefully place the TV with
1
its front side facing down
on a cushioned flat surface.
Unscrew and remove the
2
screws as shown.

Position the TV Set

Place the TV on a firm and flat surface, leaving
a space of at least 10cm around the TV set and
30cm from the top of the TV set to the wall or
cabinet.
10cm 30cm
Place the TV set where it cannot be pulled, pushed
or knocked over.
Slide out the TV stand as
3
shown.

Secure the TV Set

It is recommended to install the TV on a stable
place and implement safety measure against
overtuning. Use a commerically available string
and secure the TV to a wall or pillar.
10cm
The illustration used here is
based on model LE46EC05AU.
There may be a slight difference
in the illustration, if you are using
model LE42EC05AU.
Fasten the wall mount bracket
to the TV using the supplied
spacers and screws.
For wall mount bracket
installation, refer to the wall
mount bracket installation guide.
String
Screw
Hook
The clamp, string and hooks are not supplied.
Preparation
Clamp
String
Wall or Pillar
7