Preparation; Attach The Tv Stand; General Wall Mount Guide - Hitachi LE42EC06AU User Manual

Preparation

Attach the TV Stand

For model LE42EC06AU and LE47EC06AU only
8
Make sure the 10 screws
1
are supplied with the TV.
Make sure the 10 screws
1
are supplied with the TV.
Make sure the 4 screws
1
BT4x14 (silver) M4 x 10mm (short)
Tighten the supplied screws
4
are supplied with the TV.
BM4x15 (black)
BT4x14 (silver)
M5 x 22mm (long)
to fix the TV stand securely
BM4x15 (black)
PM4x10 (silver)
Attach the stand bracket to
2
in place.
Carefully place the TV with
2
the stand base as shown.
Attach the stand bracket to
2
its front side facing down
the stand base as shown.
on a cushioned flat surface.
stand bracket
Attach the TV stand to the
3
stand bracket
TV as shown.
stand base
stand base
screws ( BT4x14 )
screws ( BT4x14 )
For model LE55EC06AU only
Make sure the 4 screws
1
are supplied with the TV.
M5 x 22mm PM4x10 (silver)
Carefully place the TV with
2
its front side facing down
on a cushioned flat surface.
Attach the TV stand to the
3
TV as shown.

General Wall Mount Guide

Unscrew and remove the
1
screws from the back cover
as shown.
For wall mount bracket
2
installation, refer to the wall
mount bracket installation guide.
• Fasten the wall mount bracket to the TV using spacers and screws.
• The wall mount bracket is not supplied.
• Store the screws that are not in use.
• Screw hole size: M5
• Hole configuration: VESA 400x400mm
Carefully place the TV with its
3
Make sure the 4 screws
1
front side facing down on a
Carefully place the TV with its
3
are supplied with the TV.
cushioned flat surface.
front side facing down on a
Tighten the supplied screws
4
PM4x10 (silver)
cushioned flat surface.
to fix the TV stand securely
Attach the TV stand to the
4
Carefully place the TV with
2
in place.
TV as shown.
Attach the TV stand to the
4
its front side facing down
TV as shown.
on a cushioned flat surface.
Attach the TV stand to the
3
TV as shown.
Tighten the supplied screws
4
to fix the TV stand securely
in place.
Back cover
Tighten the supplied screws
5
Tighten the supplied screws
4
to fix the TV stand securely
Tighten the supplied screws
5
to fix the TV stand securely
to fix the TV stand securely in place.
in place.
in place.
screws ( BM4x15 )
screws ( BM4x15 )
CAUTION
• The TV stand may not be
fixed in place after repeatedly
tightening and loosening the
screws.
WARNING
•
During assembling and
disassembling the TV stand,
please use your hand to support
it. Failure to do so may cause
the TV stand to fall and result in
personal injury.
•
After installing the TV stand,
please ensure that the screws
are tightened firmly. Failure to
do so may cause the TV set to
tip over or become damage.
CAUTION
• Ensure the screw length is
within the length specification as
shown below. Failure to do so
may result in internal damage to
the TV set or cause it to fall.
LE32EC05AU: 16 - 20mm LE32EC05AU: 16 - 20mm
16 - 20mm
LE24EC05AU: 8 - 10mm LE24EC05AU: 8 - 10mm
Wall Mount Hook
Screw
Rear of TV Set
7