PVR File System
Select Disk USB
Check PVR File System
Time Shift Size
Free Record Limit
Sleep Timer Off
Show the on-screen display language.
The OSD language is English only.
Select "On" to display the subtitles for the hearing
Show the country of the local area.
Select the USB port that the USB storage device is
Select the partition (if available) of the USB storage
Select to check the PVR File System.
Show the status of the PVR File System checking.
Select to format the USB storage device.
The USB storage device can be formatted as
"FAT32" or "Hi Speed".
All data in the USB storage device will be erased
when it is formatted.
Select the desired recording capacity.
"PVR File System Size" is only available when "PVR
File System Type" is set to "Hi Speed".
The recording capacity depends on the video format
that is being recorded.
Show the time shift disk size.
Show the speed of the USB storage device.
Select the maximum recording time.
Select the local time zone.
This function allows you to select the local time zone
in case the time displayed in the EPG does not match
the local time of your area.
Set the current time for the TV.
If you turn off the TV by switching off the main power
switch, you will need to set the clock again.
"Clock" can only display the clock time when on a
digital broadcasting channel and the time information
Set the length of time to switch the TV off to standby
To cancel, press
To display the remaining time, press
If you switch off the TV and switch it on again, Sleep
Timer is set to "Off".
repeatedly until "Off" appears.