Preparation; Attach The Tv Stand; Detach The Tv Stand For Wall Mount - Hitachi L42EC05AU User Manual

Preparation

Attach the TV Stand

Carefully place the TV with
1
its front side facing down
on a cushioned flat surface.
Insert the TV stand to the
2
TV as shown.
The illustration used here is based on model L32EC05AU. There may be
a slight difference in the illustration, if you are using model L42EC05AU.

Detach the TV Stand for Wall Mount

Before mounting the TV on the wall, the TV stand must be removed.
Carefully place the TV with
1
its front side facing down
on a cushioned flat surface.
Unscrew and remove the
2
screws as shown.
6
Tighten the supplied screws
3
to fix the TV stand securely
in place.
32"- screws ( PM4x10 )
42"- screws ( PM4x12 )
Slide out the TV stand as
3
shown.
CAUTION
The TV stand may not be fixed in
place after repeatedly tightening
and loosening the screws.
WARNING
During assembling and
disassembling the TV stand,
please use your hand to support
it. Failure to do so may cause
the TV stand to fall and result in
personal injury.
After installing the TV stand,
please ensure that the screws
are tightened firmly. Failure to
do so may cause the TV set to
tip over or become damage.
The illustration used here is
based on model L32EC05AU.
There may be a slight difference
in the illustration, if you are using
model L42EC05AU.
Fasten the wall mount bracket
to the TV using the supplied
spacers and screws.
For wall mount bracket
installation, refer to the wall
mount bracket installation guide.