Preparation; Installation Of The Tft Tv To The Wall - Hitachi 15LD2400A Instructions For Use Manual

Hide thumbs Also See for 15LD2400A:

Table of Contents

All manuals and user guides at all-guides.com

Preparation

Install Display on solid horizontal surface such as a table or desk.

For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and

unsafe situations, please do not place any objects on top of the set.

Use this apparatus in moderate climates.

1- To install the TFT TV on the wall, first of all, foot assembly should be removed. Unscrew the

4 screws that attach the foot top cover and the foot to the TFT panel and remove the foot as-

sembly from the TFT panel.

2- Place the 4 hangers to the circular screw holes at the rear of the TFT and screw them to the

TFT panel with 4 (M4 x 10) screws.

3- Decide the place on the wall where the TFT panel would be placed. Level and mark with a

pencil the 4 mounting points on the wall hanger. Drill pilot holes for the plastic anchors and

then fix the wall hanger with 4 screws (4 x 30).

4- Raise the TFT panel and hang it to the holes on the wall bracket from the 4 hanging screws

at the rear of the TFT panel.

- 4 -

Table of Contents