Table of Contents
Advertisement
Preparation
Stand Installation
Carefully place the
1
TV with its front
side facing down
on a cushioned
flat surface.
Attach the TV stand to
2
the TV as shown.
Tighten the supplied
3
4x10 screws to fix
the TV stand
securely in
place.
4x10
•
The TV stand may not be securely fixed in place
after repeated tightening and loosening the screws.
•
During assembling and disassembling the TV stand,
please use your hand to support it. Failing to do so
may cause the TV stand to fall and result in personal
injury.
•
After installing the TV stand, please ensure that the
screws are tightened firmly. Failure to do so may
cause the TV set to tip over or become damage.
Detaching the TV Stand for Wall
Mounting
Before mounting the TV on the wall, the TV stand
must be removed.
Carefully place the
1
TV with its front side
facing down on a
cushioned flat
surface.
Unscrew and remove
2
the 4 screws as
shown.
Remove the TV stand
3
with two hands.
Attach the cap as
4
shown.
•
Fasten the wall bracket to the TV using the supplied
M5x15 screws.
•
For wall bracket installation, refer to the wall bracket
instruction guide.
5
Advertisement
Table of Contents
