Crestron Sonnex SWAMP(I)-24X8 Operation Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Stereo System
  5. Sonnex SWAMP(I)-24X8
  6. Operation manual
Crestron Sonnex SWAMP(I)-24X8 Operation Manual

Crestron Sonnex SWAMP(I)-24X8 Operation Manual

Multiroom audio system
Hide thumbs Also See for Sonnex SWAMP(I)-24X8:
Table of Contents

Advertisement

Quick Links

Download this manual
Crestron SWAMP(I)-24X8
Sonnex™ Multiroom Audio System
Operations Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sonnex SWAMP(I)-24X8 and is the answer not in the manual?

Questions and answers

Related Manuals for Crestron Sonnex SWAMP(I)-24X8

Summary of Contents for Crestron Sonnex SWAMP(I)-24X8

  • Page 1 Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System Operations Guide...

  • Page 2: Important Safety Instructions

    This document was prepared and written by the Technical Documentation department at: Important Safety Instructions  WARNING: Read these instructions.  Keep these instructions. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  Heed all warnings. DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

  • Page 3: Regulatory Compliance

    Crestron Toolbox, Excite, Sonnex, Sonnex Speaker Protect, SSP, and SystemBuilder are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. iPod is either a trademark or registered trademark of Apple, Inc. in the United States and/or other countries. Windows is either a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries.

  • Page 5: Table Of Contents

    Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System Contents Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Introduction ..........................1 Features and Functions ....................1 Applications......................... 6 Specifications ......................7 Physical Description....................10 Setup ............................16 Network Wiring......................16 Sonnex Link Wiring ....................16 Identity Code ......................16 Installation .........................

  • Page 7: Sonnex™ Multiroom Audio System: Swamp(I)-24X8

    Installer adjustable 5-band graphic or parametric EQ per zone (Continued on following page) 1. For connection of the Sonnex Link between the SWAMP-24X8 and each SWAMPE-8, use Crestron DM-CBL-8G or high-quality CAT5e shielded twisted-pair cable with DM-8G-CONN connectors. The maximum cable length is 200 feet (61 meters) per run.
  • Page 8 CAT5 Balanced sources without requiring a separate converter. For connection of the Sonnex Link between the SWAMP-24X8 and each SWAMPE-8, use Crestron DM-CBL-8G or high-quality CAT5e shielded twisted-pair cable with DM-8G-CONN connectors. The maximum cable length is 200 feet (61 meters) per run.

  • Page 9: Plug And Play Expansion

    Key setup functions are accessible via the front panel, while more advanced settings are provided via Sonnex Tools software. Naturally, the essential user controls can be made available on any Crestron touch screen, keypad, handheld remote, or mobile device as part of a complete Crestron system.
  • Page 10 Volume Offset adjustments easily allow for balancing the levels of each bussed zone for smooth, even coverage of the complete space. Excessive audio volume may damage hearing. Crestron advocates enjoying music at a safe listening level. 4  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8...
  • Page 11 Via Cresnet or high-speed Ethernet, Sonnex affords incredible integration potential as part of a complete Crestron system, enabling seamless control of every room and source through a wide selection of touch screens, keypads, wireless remotes, computers and mobile devices. Complete setup is afforded via USB or Ethernet using Sonnex Tools software, part of the Crestron Toolbox™...

  • Page 12: Applications

    Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8 Applications The following diagram shows a SWAMP-24X8 in a multi-zone application. SWAMP-24X8 in a Multi-Zone Application 6  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...

  • Page 13: Specifications

    Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System Specifications Specifications for the SWAMP(I)-24X8 are listed in the following table. SWAMP(I)-24X8 Specifications SPECIFICATION DETAILS Audio Features 24x10 stereo matrix switcher, 8-channel stereo DSP, 8-channel stereo power amplifier, Sonnex Digital Audio Transport, speaker profiles, Sonnex Speaker Protect,...
  • Page 14 41º to 104º F (5º to 40º C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 475 BTU/Hr (140 W @ 8Ω) 819 BTU/Hr (240 W @ 4Ω) (Continued on following page) 8  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 15 5. If using Cresnet as the control system interface, system expansion is limited to one Sonnex Link device. Support for more than one expander requires Ethernet as the control system interface. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  9 Operations Guide – DOC. 7049C...

  • Page 16: Physical Description

    Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8 Physical Description This section provides information on the connections, controls and indicators available on the SWAMP-24X8. SWAMP-24X8 Physical View (Front) SWAMP-24X8 Physical View (Rear) 10  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 17 Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System SWAMP-24X8 Overall Dimensions (Top) 18.47 in (470 mm) 17.29 in (439 mm) 19.00 in (483 mm) Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  11 Operations Guide – DOC. 7049C...
  • Page 18 & control configuration, volume levels, and other parameters; (4) Push buttons for execution of LCD driven functions MENU (1) Push button, steps menu back one level (Continued on following page) 12  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 19 (4) 5-pin 3.5 mm detachable terminal blocks BALANCED (13-16) Balanced stereo line level audio inputs (mutually exclusive of corresponding unbalanced inputs); Input Impedance: 20k Ω; Maximum Input Level: 4 V (Continued on following page) Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  13 Operations Guide – DOC. 7049C...
  • Page 20 (2) 4-pin 3.5mm detachable terminal blocks Cresnet slave ports, paralleled Power (24 Volts DC) Data Data Ground NOTE: The NET port does not supply or consume power. (Continued on following page) 14  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 21 4. Supports any combination of up to eight Sonnex Link devices. For connection of the Sonnex Link between the SWAMP-24X8 and each device, use Crestron DM-CBL-8G or high-quality CAT5e shielded twisted-pair cable. The maximum cable length is 200 ft (61 m) per run.

  • Page 22: Setup

    The Net ID of the SWAMP-24X8 has been factory set to A1. The Net IDs of multiple SWAMP-24X8 devices in the same system must be unique. Net IDs are changed from the front panel or from a personal computer (PC) via Crestron Toolbox (refer to “Establishing Communication” on page 44).

  • Page 23: Installation

    SWAMP-24X8’s IP table using Crestron Toolbox. For more details, refer to “Set the IP ID” which starts on page 39 or the Crestron Toolbox help file. The IP IDs of multiple SWAMP-24X8 devices in the same system must be unique.
  • Page 24 Four “feet” are preinstalled with the SWAMP-24X8 so that if the unit is not rack mounted, the feet can provide stability when the unit is placed on a flat surface or stacked. NOTE: No more than two SWAMP-24X8 units should be stacked. 18  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...

  • Page 25: Hardware Hookup

    Source L + Source L - Source L - jumper to GND Shield/Ground Ground Source R + Source R + Source R - Source - jumper to GND Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  19 Operations Guide – DOC. 7049C...
  • Page 26 SAT-70V/100V profile built into the Sonnex Tools application to configure a high-pass filter on the zone that is connected to the SAT-70V/100V. For details, refer to the Sonnex Tools help file. 20  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 27 There are two different wiring configurations that can be used. Wiring Diagram: Passive Subwoofer Using an Additional Output Pair BUSSED LEFT RIGHT STEREO PAIR ROOM Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  21 Operations Guide – DOC. 7049C...
  • Page 28 3. Use Sonnex Tools or the SWAMP-24X8’s “Installer Mode” menu to bus the outputs together. If using a bridged subwoofer, use Sonnex Tools or the SWAMP-24X8’s “Installer Mode” menu to bridge the subwoofer outputs. 22  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 29 Devices cable to increase the number of output zones, with a maximum of eight devices. NOTE: When connecting a SWAMP-24X8 to a Sonnex Link Device, Crestron recommends using Crestron DM-CBL-8G or high-quality CAT5e shielded twisted- pair cable. Shielded connectors such as the DM-8G-CONN must be used.
  • Page 30 7. Connect power to the device. Label the Buttons Use Crestron Engraver software to print custom labels for the SWAMP-24X8’s front panel buttons and LEDs. Crestron recommends printing on 100-pound paper. Paper weighing less than 100 pounds tends to crumple while sliding in, while paper weighing more than 100 pounds may not fit.

  • Page 31: Configuration

    The SWAMP-24X8 can be configured from the SWAMP-24X8’s front panel using the “Installer Mode” menu or from a PC using the Sonnex Tools application in Crestron Toolbox. This document contains instructions for using the "Installer Mode” menu. For information on using Sonnex Tools to configure the SWAMP-24X8, refer to the Sonnex Tools help file.

  • Page 32: Source Setup

    Since zone volumes track in a bus this ensures the selected zone is always at the specified level above/below the other zones in the bus.  Bussing Lists: View the zones that are currently members of a bus. 26  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 33 Sonnex Speaker Protect protects against speaker damage in all situations.  Crestron DRC: Enables or disables the Crestron Dynamic Range Control function.  Global EQ: Sets the same EQ preset for all zones in the system. Setting this option overrides any EQ selection that was previously set for an individual zone.
  • Page 34 2. Press the  or ▲ buttons to display Loudness and press ENTER. A list of zones is displayed. 3. Press the  or ▲ buttons to display the zone to be controlled and press ENTER. The Loudness screen is displayed. Loudness Screen 28  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 35 1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup” Menu” on page 27. 2. Press the  or ▲ buttons to display Minimum Volume and press ENTER. A list of zones is displayed. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  29 Operations Guide – DOC. 7049C...
  • Page 36 ENTER. The Startup Vol screen is displayed. Startup Vol Screen 4. Press the  or ▲ buttons to display the startup volume setting to be applied and press ENTER. 30  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 37 3. Press the  or ▲ buttons to display the bus to view and press ENTER. The first zone in the bus is displayed. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  31 Operations Guide – DOC. 7049C...
  • Page 38 2. Press the  or ▲ buttons to display Wattage and press ENTER. A list of zones is displayed. 3. Press the  or ▲ buttons to display the zone to be configured and press ENTER. The Wattage screen is displayed. 32  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 39 2. Press the  or ▲ buttons to display Speaker Protect and press ENTER. A list of zones is displayed. 3. Press the  or ▲ buttons to display the zone to be configured and press ENTER. The Protect screen is displayed. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  33 Operations Guide – DOC. 7049C...
  • Page 40 1. Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup” Menu” on page 27. 2. Press the  or ▲ buttons to display Crestron DRC and press ENTER. A list of zones is displayed. 3. Press the  or ▲ buttons to display the zone to be configured and press ENTER.

  • Page 41: Expander Status

    1. Enter the “Installer Mode” menu as described in “Enter the “Installer Mode” Menu” on page 25. 2. Press the  or ▲ buttons to display Network Setup and press ENTER. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  35 Operations Guide – DOC. 7049C...
  • Page 42 DHCP to obtain a default router, refer to “Enable/Disable DHCP” which starts below. To view or manually set the default router: 1. Enter the “Network Setup” menu as described on page 35. 36  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 43 1. Enter the “Network Setup” menu as described on page 35. 2. Press the  or ▲ buttons to display MAC Address and press ENTER. The MAC address is displayed. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  37 Operations Guide – DOC. 7049C...

  • Page 44: Control Setup

    2. Press the  or ▲ buttons to display Domain Name and press ENTER. The domain name is displayed. 3. Press ENTER to return to the previous screen. NOTE: The domain name can be changed with Crestron Toolbox. Control Setup Select this option to configure and view the SWAMP-24X8 control system settings.
  • Page 45 6. To save the control system IP address and return to the “Control Setup” menu, move the cursor to the right-most octet and press ENTER. To cancel the operation and return to the previous screen, press MENU. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  39 Operations Guide – DOC. 7049C...

  • Page 46: About

    2. Press the  or ▲ buttons to display About and press ENTER. 3. Press the  or ▲ buttons to display information about the SWAMP-24X8. 4. Press ENTER to return to the “Installer Mode” menu. 40  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...

  • Page 47: Programming Software

    Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron Web site. To post a question or view questions submitted to Crestron’s True Blue Support, log in at www.crestron.com/onlinehelp. First-time users must establish a user account to fully benefit from all available features.
  • Page 48 IP table for the Ethernet-connected SWAMP-24X8 must be empty. SWAMP-24X8 Device, Slots 8 and 9 NOTE: If using Cresnet for communications between the SWAMP-24x8 and a control system, only one Sonnex Link device can be connected. 42  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...
  • Page 49 Net ID or IP ID of each unit. Refer to “Identity Code” on page Program Manager Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View.

  • Page 50: Uploading And Upgrading

    2-Series Control Systems Reference Guide (Doc. 6256). 2. Use the Address Book in Crestron Toolbox to create an entry for the SWAMP-24X8 using the expected communication protocol (indirect). Select the Cresnet ID of the SWAMP-24X8 and the address book entry of the control system that is connected to the SWAMP-24X8.

  • Page 51: Programs And Firmware

    SIMPL Windows or Crestron Toolbox. Firmware Check the Crestron Web site to find the latest firmware. (New users may be required to register to obtain access to certain areas of the site, including the FTP site.) Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  45...

  • Page 52: Program Checks

    Cresnet or Ethernet. Cresnet Connections Using Crestron Toolbox, display the network device tree (Tools | Network Device Tree View) to show all network devices connected to the control system. Right-click on the SWAMP-24X8 to display actions that can be performed on the SWAMP-24X8.

  • Page 53: Operation

    Operation The SWAMP-24X8 can be controlled from the front panel or the Sonnex Tool in Crestron Toolbox. NOTE: For information on Crestron Toolbox, refer to the Crestron Toolbox help file. Power To turn on the SWAMP-24X8, move the POWER switch to . To turn off the...

  • Page 54: Volume Control

    5. Press MENU to return to the “Main Menu”. Volume Control To raise the volume in the selected zone(s), turn the VOLUME knob clockwise. To lower the volume in the selected zone(s), turn the VOLUME knob counterclockwise. 48  Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 Operations Guide– DOC. 7049C...

  • Page 55: Problem Solving

    Use the Right Wire To ensure optimum performance over the full range of the installation topology, use Crestron Certified Wire only. Failure to do so may incur additional charges if support is required to identify performance deficiencies because of using improper wire.

  • Page 56: Reference Documents

    Sonnex™ Multiroom Audio System Crestron SWAMP(I)-24X8 chain. If the unit is run from a Crestron system power supply network port, the Cresnet power usage of that unit is the Cresnet power usage of the entire run. The wire gauge and the Cresnet power usage of the run should be used in the following equation to calculate the cable length value on the equation’s left side.

  • Page 57: Future Updates

    Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System Future Updates As Crestron improves functions, adds new features and extends the capabilities of the SWAMP-24X8, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.

  • Page 58: Return And Warranty Policies

    (property or economic damages inclusive) arising from the sale or use of this equipment. Crestron is not liable for any claim made by a third party or made by the purchaser for a third party.
  • Page 59 Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System This page is intentionally left blank. Sonnex™ Multiroom Audio System: SWAMP(I)-24X8  53 Operations Guide – DOC. 7049C...
  • Page 60 Crestron Electronics, Inc. Operations Guide – DOC. 7049C 15 Volvo Drive Rockleigh, NJ 07647 (2028550) Tel: 888.CRESTRON 10.12 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

Table of Contents