Table of Contents
Advertisement
Quick Links
DO
GUIDE
C2N(I)-AMP-6X100
6 Room + 2 Room Audio System
The C2N-AMP-6X100 and C2NI-AMP-6X100 are generally identical. For simplicity within this guide, the term "C2N-AMP-6X100" is used except where
noted.
DO
Install the Device
The C2N-AMP-6X100 can be mounted into a rack or placed onto a flat surface.
When mounting into a rack, the C2N-AMP-6X100 occupies 2U of rack space. Using a #1 or #2 Phillips screwdriver, attach the two included rack ears to
the device. Then, mount the device into the rack using four mounting screws (not included).
DO
Make Connections
Make the necessary connections as called out in the diagram below. Connect the power last.
ANALOG SOURCES (IN):
From Source Devices
SPEAKER OUTPUTS:
ANALOG SOURCES
To Loudspeakers
(OUT):
L + - + -R
To Additional Ampli ers
+
-+
-
LEFT RIGHT
NON-BRIDGE
LINE OUTPUTS:
NET:
To Additional Ampli ers
To Cresnet
Network
®
(Mirrors Outputs 5 and 6)
LAN:
ROOM OUTPUTS:
10BASE-T/100BASE-TX
To Additional Ampli ers
Ethernet to LAN
DO
Check the Box
QUANTITY
PRODUCT
2
Metal, Bracket, Ear, 2U
1
Power Cord, 3-Prong
2
Connector, 4-Pin
6
Connector, 4-Pin, Right-Angle
6
Screw, 06-32, 5/16" L, Flat, Phillips
1
Label, Filler Strip, Cardstock, 11.9" x 0.4"
1
Label, Filler Strip, Cardstock, 7.9" x 0.4"
1
Label, Custom, Identification
1
Safety Instructions
Speakers can be connected for stereo, mono, bridged mono, or bridged stereo operation as shown below.
Speaker Connections
Normal Stereo Mode
Mono Operation
M= L + R
2
Mono Mode
Ground
Mono Operation
M= L + R
2
Bridged Mono Mode
POWER:
Bridged Stereo Mode
From Line Voltage
(Two Zone Outputs Are Required)
The mode of operation is set in Crestron
programming software. Each zone's mode of operation can be set independently (except when a zone is part
®
of a bridged pair).
CAUTION:
When set for bridged operation (stereo or mono), triple the power (up to 150 watts into 8 ohm speakers only) output can be delivered to the
connected speaker(s). Make sure all connected speakers are properly rated for the increased power output.
Zone 5 and 6 Line Output Function
(If the Source Is Connected to Outputs 5 or 6)
M
M
M
M
M
N/A
M
N/A
L
N/A
R
N/A
PART NUMBER
2034434
2001134
2003576
2003584
2007223
4520506
4520508
4509950
2018589
Advertisement
Table of Contents
Related Manuals for Crestron C2NI-AMP-6X100
Summary of Contents for Crestron C2NI-AMP-6X100
- Page 1 Connector, 4-Pin 2003576 Connector, 4-Pin, Right-Angle 2003584 The C2N-AMP-6X100 and C2NI-AMP-6X100 are generally identical. For simplicity within this guide, the term “C2N-AMP-6X100” is used except where noted. Screw, 06-32, 5/16" L, Flat, Phillips 2007223 Label, Filler Strip, Cardstock, 11.9" x 0.4"...
- Page 2 Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.
Need help?
Do you have a question about the C2NI-AMP-6X100 and is the answer not in the manual?
Questions and answers