Checking The Print Alignment - Brother DCP-J125 User Manual

Checking the print alignment

You may need to adjust the print alignment
after transporting the machine, if your printed
text becomes blurred or images become
faded.
a
Press Menu.
b
Press a or b to choose
Ink Management.
Press OK.
c
Press a or b to choose Test Print.
Press OK.
d
Press a or b to choose Alignment.
Press OK.
e
Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
 If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press + (Yes) to
finish Alignment Check, and go to
step i.
If another test print number is a

better match for either 600 dpi or
1200 dpi, press - (No) to choose it.
g
For 600 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
h
For 1200 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
i
Press Stop/Exit.
36
A