Machine Information; Checking The Serial Number; Reset Functions; How To Reset The Machine - Brother DCP-J125 User Manual

Machine Information

Checking the serial number

You can see the machine's serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose
Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
d
Press Stop/Exit.

Reset functions

The following reset functions are available:
1 Network (DCP-J315W only)
You can reset the print server back to its
default factory settings such as the IP
address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.

How to reset the machine

B
a
Press Menu.
B
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Reset.
Press OK.
d
Press a or b to choose the type of reset
you want to use.
Press OK.
Press + to confirm.
e
Press + to reboot the machine.
B
Troubleshooting
B
B
47