How To Scan To A Memory Card - Brother DCP-J125 User Manual

How to scan to a
memory card
You can scan monochrome and colour
documents into a memory card. Monochrome
documents will be stored in PDF (*.PDF) or
TIFF (*.TIF) file formats. Colour documents
may be stored in PDF (*.PDF) or JPEG
(*.JPG) file formats. The factory setting is
Color 150 dpi and the default file format
is PDF. The machine automatically creates
file names based on the current date. (For
details, see the Quick Setup Guide.) For
example, the fifth image scanned on July 1,
2010 would be named 01071005.PDF. You
can change the colour and quality.
Quality
Color 150 dpi
Color 300 dpi
Color 600 dpi
B/W 200x100 dpi
B/W 200 dpi
a
Make sure you have put the memory
card in the correct slot.
IMPORTANT
DO NOT take out the memory card while
PHOTO CAPTURE is blinking to avoid
damaging the card or data stored on it.
b
Load your document.
c
When you want to scan to a memory
card, press
5
Selectable File
Format
JPEG / PDF
JPEG / PDF
JPEG / PDF
TIFF / PDF
TIFF / PDF
(SCAN).
Printing photos from a memory card
d
Press a or b to choose
Scan to Media.
Sel.&Press
Scan to File
Scan to Media
Scan to E-mail
Press OK.
e
Do one of the following:
 To change the quality, press a or b to
choose Quality. Press OK. Go to
step f.
 Press Mono Start or Colour Start to
start scanning without changing
additional settings.
f
Press a or b to choose
Color 150 dpi, Color 300 dpi,
Color 600 dpi, B/W 200x100 dpi
or B/W 200 dpi.
Press OK.
g
Do one of the following:
 To change the file type, go to step h.
 Press Mono Start or Colour Start to
start scanning without changing
additional settings.
h
Press a or b to choose File Type.
Press OK.
Press a or b to choose JPEG, PDF or
TIFF.
Press OK.
Note
• If you chose a Color resolution in step f,
you cannot choose TIFF.
• If you chose a B/W resolution in step f,
you cannot choose JPEG.
OK
27
5