Motion Detection - D-Link DCS-3420 User Manual

Section 3 - Configuration
Check this option to turn on the motion
Enable motion
detection:
detection.
The name of the motion detection
Window name:
window.
Sensitivity meter allows the user to set
Sensitivity:
how sensitive for the motion triggering.
The sensitivity is based on pixel change
of the video image.
Percentage meter allows use to specify
Percentage:
how many percentage of the motion
screen is changed to trigger the motion
detection. Lower percentage gives higher
sensitivity of the motion detection.
Adds new windows that monitor specific
New:
area of the image window. Up to 3 motion
detection windows can be added.
Saves the new windows settings.
Save:
A green bar means the image variation is under the monitoring level, and no motion detection alert is triggered. A red
bar means the image variation is over the monitoring level and a motion detected alert is triggered. When
the bar goes red, the window that the motion is detected in will also be outlined in red (note: remember that
you can have up to 3 windows selected for motion detection). You can return to the DCS-3420 Home Page
and the monitored window will not be visible, but the red frame will show on the home page when motion is
detected.
D-Link DCS-340 User Manual

Motion Detection

4