Configuration; Advanced; Network - D-Link DCS-3420 User Manual

Hide thumbs Also See for DCS-3420:
Table of Contents

Advertisement

Section 3 - Configuration
Necessary for network identification.
IP Address:
Used to determine if the destination is
Subnet Mask:
the same subnet. The default value is
"255.255.255.0."
The router used to forward frames to
Default Router:
destinations in a different subnet. Invalid
router settings may cause the failure of
transmissions to a different subnet.
Primary domain name server that
Primary DNS:
translates names to IP addresses.
Secondary domain name server to
Secondary DNS:
backup the primary one.
(Point-to-Point Protocol over Ethernet)
PPPoE:
Select this option if the camera is directly
connected to the Internet through a DSL
modem, and the ISP (Internet Service
Provider) requires you to use PPPoE for the Internet connection. Input the authentication information from
your ISP into these fields. Note: The Internet (WAN) IP Address of the PPPoE will be sent through the
email.
D-Link DCS-340 User Manual

Advanced

Network

33

Advertisement

Table of Contents
loading

Table of Contents