D-Link DCS-3420 User Manual page 83

Section 3 - Configuration
Record # secs before event:
Record # secs after event:
Media Type:
You can "drag and drop" in the grid area of the camera list to change the sequence of the connected Network Cameras,
which is shown below. This will allow you to rearrange the cameras in an order of your choice. Once the camera is
moved to a specified location, the proceeding cameras will then move 1 position up or 1 position down depending on
which direction the selected camera was moved.
Press and hold the left mouse button at the gray index field of the camera you would like to move.
D-Link DCS-340 User Manual
Recording Settings
Once the automatic video recording has been activated, you can change this setting to regulate the
recording of triggered events. Recording will start from the specified number of seconds before the alert
event has been invoked.
Recording will last for the specified number of seconds after the alert event has been invoked.
You can specify which media type you want to record: Video, Audio, or both.
Changing the Camera Order in the List
83