D-Link DCS-3420 User Manual page 55

Section 3 - Configuration
In this window, enter the settings for the FTP server you wish to upload the image to. Optionally, you can enter settings
for a secondary backup FTP server.
The Default port is 21. To connect to an
Local FTP
server port:
FTP server, it is recommended that you do
not change the port number unless your
camera is behind a router. If your camera
is behind a router, you can assign any port
number to this field, but you must enable
port forwarding on the router. Please refer
to your router manual for more information
on port forwarding.
If you are going to upload snapshots to
1st FTP server:
an FTP server, you will need to fill in the
Domain name or IP address of your internal/
external FTP server such as ftp://dlink.com
or ftp://192.168.0.123. (The server name
and IP address will vary depending on the
user.) The following user settings must be
correctly configured for remote access.
The port of the FTP server. The default is
1st FTP server
port: 21 for an external FTP site.
Specify the user name to access the
1st FTP user
name:
external FTP server (e.g. John Smith).
Specify the password to access the external
1st FTP
password:
FTP server (e.g. 12345).
D-Link DCS-340 User Manual