Installing The Canopy And Canopy Trim Ring - Hunter Ceiling Fans Installation And Operation Manual

5 • Installing the Canopy and Canopy Trim Ring
Steps 5-1 – 5-2
Canopy
8
Steps 5-4 – 5-5
Hunter Fan Company
5-1. Partially install two canopy screws (about 2 full turns) in the
Hanger Bracket
hanger bracket.
5-2. Raise the canopy over the hanger bracket. Align partially installed
screws with key slots in canopy.
5-3. Twist canopy clockwise to secure.
5-4. Install third canopy screw in round hole on canopy. Securely
tighten all three screws.
Canopy Trim
Ring
5-5. Using both hands, push the canopy trim ring up to the top of the
canopy.  e canopy trim ring will snap and lock into place.
Should you need to remove the canopy
trim ring, follow these steps:
Step 5-3
Canopy
Screw
1. Locate the tab indicators, small
bumps on top of tabs.
2. Press fi rmly on opposite sides of the
ring towards the canopy.  e tabs
will fl ex out releasing the trim ring
from the canopy
42002-01 • 10/12/05