7-1. Holding the canopy, raise the fan off the hook.
7-2. Align the slots in the canopy with the tabs on the ceiling plate.
7-3. Raise the canopy over the ceiling plate. Rotate the canopy
clockwise until the tabs on the ceiling plate totally engage with
the slots in the canopy.
7-4. Loosely assemble the three canopy screws into the canopy one at
a time. Once all three screws are in, tighten them.
7-5. Using both hands, push the canopy trim ring up to the top of the
canopy. e canopy trim ring will snap and lock into place.
Should you need to remove the canopy
trim ring, follow these steps:
1. Locate the tab indicators, small
bumps on top of tabs.
2. Press fi rmly on opposite sides of the
ring towards the canopy. e tabs
will fl ex out releasing the trim ring
from the canopy
41868-01 • 02/20/04
7 • Installing the Canopy and Canopy Trim Ring
Steps 7-4 – 7-5
Step 7-2
Canopy
Ceiling Plate
Canopy Trim
Ring
11
Step 7-3
Canopy
Screw
Hunter Fan Company