10/100base-t ethernet extender over vdsl2, transmits up to 100-/60-mbps downstream/ upstream data up to 984.2 feet (300 meters) over a single twisted pair of copper wire (16 pages)
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Support Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Information Web site: www.blackbox.com • E-mail: info@blackbox.com...
We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.” You’ll be live with one of our technical experts in less than 30 seconds.
Page 3
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment.
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3.
This quick start guide describes how to install and use the Hardened Ethernet Extender. This is the Hardened Ethernet Extender of choice for harsh environments with space constraints. QS1. Physical Description The Port Status LEDs and Power Inputs Figure QS-1. LBPS304A, LBPS301A, LB304A. Table QS-1. Power input assignment. Power Signal...
Quick Start Guide Table QS-2. DIP switch assignment. DIP Switch Description The device operates in local mode. The device operates in remote mode. Table QS-3. LED indicators Power LEDs State Indication Power 1 Steady Power on Power 2 Power off Power 3 Ethernet LEDs Steady...
Page 7
Quick Start Guide • PoE LED is only on the for Hardened IEEE 802.3at PoE PSE Ethernet Extender versions (LBPS301A and LBPS304A). • DC Terminal Block Power Inputs: There are two pairs of power inputs that you can use to power up this Ethernet Extender. Redundant power supplies function is supported.
Quick Start Guide Use a twisted-pair telephone line to connect two RJ-11 or terminal block ports between two Hardened Ethernet Extenders. WARNING: Inappropriate operation might damage the terminal block. QS.2 Functional Description • Meets NEMA TS1/TS2 environmental requirements: temperature, shock, and vibration for traffic control equipment. •...
Preface Preface This manual describes how to install and use the Hardened Ethernet Extender. The Hardened Ethernet Extender provides one channel for Ethernet over existing voice-grade twisted-pair copper wire. The Hardened Ethernet Extender fully complies with IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX/FX standards. 724-746-5500 | blackbox.com Page 9...
Operating Voltage, Maximum Current Consumption, Power Consumption — LBPS301A: 1.6 A @ 24 VDC, 38.4 W max.; LBPS304A: 2.88 A @ 24 VDC, 1.44 A @ 48 VDC, 69.1 W max.; LB304A: 0.36 A @ 24 VDC, 0.18 @ 48 VDC, 8.64 W max. Speed — 10BASE-T: 10/20 Mbps for half-/full-duplex;...
• For use in Pollution Degree 2 Environment. • Supports DIN rail, panel, and rackmounting installation. 2.3 What’s Included Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at 724-746-5500 or info@blackbox.com. • Hardened Ethernet Extender •...
Chapter 2: Overview 2.4 Hardware Description Figure 2-1 shows the Hardened Ethernet Extenders. Tables 2-1 through 2-3 describe their components. LBPS304A LBPS301A LB304A Figure 2-1. Table 2-1. LBPS304A Components. Number Component Description Power LED 1 Lights steady when power is on. LED is off when power is off.
Page 14
Links to Ethernet devices. (1) RJ-11 connector Links to twisted-pair cable. (1) 2-position terminal block Links to twisted-pair cable. Table 2-3. LB304A Components. Number Component Description Power LED 1 Lights steady when power is on. LED is off when power is off.
Chapter 3: Configuration 3. Configuration 3.1 One-Channel Hardened Ethernet Extender 3.1.1 DIP Switch Ports The Hardened Ethernet Extender provides TX ports and one Ethernet Extender port. For the TX ports, it uses RJ-45 connectors and autosenses 10-/100-Mbps speeds. For the Ethernet Extender port, it uses RJ-11 and terminal block connectors and autosenses 1-/3-/5-/10-/15-/20-/25-/30-/40-/50-Mbps speeds.
Chapter 3: Configuration 3.1.2 Front Panel LED Indicators The LED indicators give you instant feedback on the status of the Hardened Ethernet Extender. Table 3-2. LED indicators Power LEDs State Indication Power 1 Steady Power on Power 2 Power off Power 3 Ethernet LEDs Steady...
Page 17
Chapter 3: Configuration 10/100BASE-TX and Ethernet Extender Connectors 10/100BASE-TX Connection Figure 3-1 shows the 10/100BASE-TX RJ-45 port. Table 3-4 lists the pinouts of this port. Figure 3-1. Table 3-4. RJ-45 port pin assignments. Regular Ports Uplink Ports Output Transmit Data + Input Receive Data + Output Transmit Data - Input Receiver Data -...
Chapter 4: Installation 4. Installation This chapter gives step-by-step installation instructions for the Hardened Ethernet Extender. 4.1 Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.
Chapter 4: Installation Power 3, terminal Power 2, terminal Power 3, terminal block, 24-48 VDC block, 24-48 VDC block, 24-48 VDC Power 2, terminal block, 24-48 VDC Ground Ground Power 1, DC Power 1, DC jack, 48 VDC jack, 48 VDC Field wiring terminal: Use copper conductors only,...
Chapter 4: Installation Step 1: Connect the DC power cord to the pluggable terminal block on the Hardened Ethernet Extender, and then plug it into a standard DC outlet. Step 2: Disconnect the power cord if you want to shut down the Hardened Ethernet Extender. 4.4.2 48-VDC DC Jack Step 1: Connect the supplied AC to DC power adapter to the receptacle on the top side of the Hardened Ethernet Extender.
Page 24
About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less.
Need help?
Do you have a question about the LB304A and is the answer not in the manual?
Questions and answers